mcp2221_error_codes.h

Go to the documentation of this file.

 
#ifndef MCP2221_ERROR_CODES_H
#define MCP2221_ERROR_CODES_H
 
typedef enum {
    MCP2221_ERR_OK = 0,               
    MCP2221_ERR_USB = -1,             
    MCP2221_ERR_TIMEOUT = -2,         
    MCP2221_ERR_NOT_ACK = -3,         
    MCP2221_ERR_LOW_SCL = -4,         
    MCP2221_ERR_LOW_SDA = -5,         
    MCP2221_ERR_INVALID = -6,         
    MCP2221_ERR_I2C = -7,             
    MCP2221_ERR_FLASH_WRITE = -8,     
    MCP2221_ERR_FLASH_PASSWD = -9,    
    MCP2221_ERR_GPIO_MODE = -10,      
    MCP2221_ERR_GENERIC = -11,        
    MCP2221_ERR_I2C_SHORT_READ = -12, 
    MCP2221_ERR_FLASH_READ = -13,     
    MCP2221_ERR_NOT_FOUND = -14,      
    MCP2221_ERR_NO_MEMORY = -15,      
    MCP2221_ERR_ACCESS = -16,         
    MCP2221_ERR_BUSY = -17,           
    MCP2221_ERR_USB_INIT = -18,       
    MCP2221_ERR_USB_ENUM = -19,       
    MCP2221_ERR_USB_OPEN = -20,       
    MCP2221_ERR_USB_CLAIM = -21,      
    MCP2221_ERR_COMMAND_FAILED = -22, 
    MCP2221_ERR_PROTOCOL = -23        
} mcp2221_error_code_t;
 
#endif // MCP2221_ERROR_CODES_H